Wireless

Arri WCU-4 Wireless Follow Focus Kit

  • 1 Arri WCU-4 Wireless Follow Focus Hand Unit
  • 1 Arri WCU-4 Monitor Mount
  • 1 Arri WCU-4 Table Top Mount
  • 1 Arri WCU-4 Neck Strap
  • 1 C Force Plus Motor (Integrated Bracket, Reduction 19/15mm rods)
  • 2 Digital Motor LBus Cables
  • 4 Sony Batteries for WCU-4 Hand Unit
  • 2 Sony Chargers
  • 5 Arri Pre-Marked Disks

Teradek Bolt Pro Plus 3000 1:3 w/ Array Kit

  • 1 Bolt Pro 3000 TX SDI/HDMI
  • 2 Bolt Pro 3000 RX SDI/HDMI
  • 1 Teradek Bolt Sidekick II
  • 1 Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
  • 1 Bolt RX Single (AB or V) Mount Battery Plate 14.4V
  • 1 SKB Waterproof Utility Case (22 x 17 x 8 inches)
  • 5 N-Male to RP-SMA 12 inch cables (for use with Bolt Rx Only)
  • 1 1/4 20″ Thumb Screw (1.25 inch)
  • 1 1/4 20″ Thumb Screw Plastic Head 2 inch length
  • 1 1/4 20 Thumb Screw Plastic Head 3/8 inch length
  • 1 1/4-20 Screw Phil Pan Mach Black 3/8 inch
  • 1 1/2 20″ Lightstand Adapter
  • 1 3/8″ Lightstand Adapter
  • 1 2pin Lemo to PowerTap – 18 inch Cable
  • 1 2pin Lemo to PowerTap – 11 inch Cable
  • 1 PSU 2-Pin Lemo 18W
  • 1 USB 3.0 SuperSpeed Cable (A to Micro, 3ft)
  • 1 Hot Shoe Adapter
  • 2-3 (2 for 1 Rx, 3 for 2 Rx) SDI Cables (BNC to BNC)
  • 2-3 (2 for 1 Rx, 3 for 2 Rx) HDMI Cables (Type A to Type A)
  • 5 Antenna 2dBi WiFi 5.8GHz
  • 2 Antenna 2dBi WiFi 2.4/5.8 GHz

Teradek Bolt Pro Plus 500 1:3 Kit

  • 1 Teradek Bolt Pro Plus 500 TX Transmitter 1080P
  • 3 Teradek Bolt Pro Plus 500 RX Receiver 1080P
  • 1 Ikan Director / DP/ AC Handheld Bracket for TV Logic 5.6″ / DP7 7.7″
  • 1 3/8 16″ – 1/4 20″ RAM Mount For Transmitter
  • 1 Thumbscrew RX
  • 2 12″ Teradek 3-pin to D-Tap Power Power Cable for Teradek TX
  • 3 12′ Teradek 2-pin to D-Tap Power Power Cable for Teradek RX
  • 1 30″ Teradek RS 2-pin D-Tap to 12v RS 2-pin Lemo Power Cable for Teradek RX
  • 1 AC Power Adapter TX / RX

Bartech Wireless Follow Focus Kit

 

  • 1 BarTech BFD Hand Unit Transmitter
  • 1 BarTech BFD Receiver
  • 1 Palomar M-One Focus Iris Motor
  • 1 M-One 5-Pin Lemo to BFD Receiver 5-Pin Lemo Power Cable
  • 1 BFD Receiver 2-pin Lemo to Anton Bauer P-Tap Power Cable
  • 1 BFD Receiver 2-pin Lemo to 5-Pin 12v Power Cable (ARRI ALEXA)
  • 1 Lens Gears: Module/Pitch 0.8m-32P, 0.6m, 48P, 0.5m, 0.4m-64P, extra wide 0.8m-32P.
  • 1 19 mm universal mounting bracket, Will mount on either side of motor in either direction.
  •  1 2.5” universal extension/offset bracket with 19mm attachment tubes (1.12” & 2.12” long)
  • 1 Rod Collets: 5/8”, 15 mm, 1/2″, 19mm w/o a collet.

Additional equipment available upon request.